Add lengths in any mix of units, turn square feet into linear feet of boards, or price trim, lumber and fencing by the linear foot.
What is a linear foot?
A linear foot is simply a foot of length, measured along the item, whatever its width or thickness. Trim, lumber, fencing, countertops and gutters are often priced this way.
Total linear feet = sum of all lengths in feet (1 in = 1/12 ft, 1 yd = 3 ft, 1 m = 3.28084 ft)
Linear feet from area = square feet × 12 ÷ board width in inches
Cost = linear feet × price per linear foot
Worked examples
Adding mixed units: 8 ft 6 in + 30 in + 2 m = 8.5 + 2.5 + 6.5617 = 17.56 linear feet. (1 m = 1 ÷ 0.3048 ft = 3.28084 ft, from NIST's exact definition of the foot.)
Square feet to linear feet: covering 120 sq ft with boards that show 5.5 in of face: 120 × 12 ÷ 5.5 = 261.8 linear feet. Each linear foot of a 5.5 in board covers 5.5 ÷ 12 = 0.458 sq ft.
Price: 100 linear feet of trim at $2.35 per foot = $235.00.
Linear feet vs board feet vs square feet
- Linear feet measure length only.
- Square feet measure area: length × width.
- Board feet measure lumber volume: thickness (in) × width (in) × length (ft) ÷ 12. Hardwood is often sold this way; the lumber calculator works it out.
Getting a realistic number
- Use the face width (the part that shows) for tongue-and-groove or shiplap, not the full width, since the boards overlap.
- Nominal sizes: a 1×6 is actually about 5.5 in wide, and a 2×4 is 1.5 × 3.5 in.
- Add waste: 10% is common for cuts and defects; more for diagonal layouts.
- Pieces, not feet: boards come in set lengths (8, 10, 12, 16 ft), so plan how the pieces cut.
Sources
How we checked this
Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:
- 8 ft 6 in + 30 in + 2 m = 17.56 ft ✓
- 10' 6" + 24" = 12.50 ft ✓
- 120 sq ft with 5.5 in boards: 261.82 ft ✓
- 100 linear feet at $2.35: $235.00 ✓
- Edge: text it can't read is flagged ✓
Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.
Questions people ask
How do I calculate linear feet?
Measure each piece's length, convert everything to feet (divide inches by 12) and add them up. For an area, multiply the square feet by 12 and divide by the board's width in inches.
How many linear feet are in a square foot?
It depends on the width. For a 12 in wide board, 1. For a 6 in board, 2. For a 5.5 in face, 12 ÷ 5.5 = 2.18.
How many inches are in a linear foot?
12. A linear foot is just a foot of length.
How do I convert linear feet to square feet?
Multiply the linear feet by the width in inches and divide by 12. 100 linear feet of 5.5 in boards covers 45.8 sq ft.
How much is 2 meters in feet?
6.5617 ft, since 1 foot is exactly 0.3048 m.