Calcist

Style

Buttons

Spacing

How much to show

Decimal places

Text size

Watts to amps converter

Watts to amps needs the voltage. This converter starts at 120 V, the US household outlet, with a power factor of 1. Change either to match your circuit.

Type in either box. The other one updates as you type.

Private: calculated on your device. Nothing you type is sent anywhere.

Next: Need volts or ohms too? Use the Ohm's law calculator. Working out the running cost? Try the electricity cost calculator.

The formula

DC: watts = volts × amps
AC single phase: watts = volts × amps × power factor
AC three phase: watts = √3 × volts (line to line) × amps × power factor

You can't turn watts into amps (or back) without the voltage. This page assumes 120 V, the standard voltage of US household outlets, and a power factor of 1, which is right for heaters, kettles, toasters and incandescent bulbs. Change the voltage for a 240 V dryer circuit, a 12 V car system or a 230 V outlet outside North America. Motors, compressors and many electronics draw more current than watts ÷ volts suggests, because their power factor is below 1.

Worked example

A 1,500 W space heater on a 120 V outlet: 1,500 ÷ 120 = 12.5 A. On 240 V it would draw 6.25 A. A 100 W device on a 12 V DC system draws 100 ÷ 12 = 8.33 A.

Solving for volts or ohms instead? Use the Ohm's law calculator.

Watts to amps chart

Power factor 1 (heaters, kettles, incandescent bulbs). For motors, use the converter with your power factor.

wattsamps at 12 V DCamps at 120 Vamps at 230 Vamps at 240 V
100 W8.33330.83330.43480.4167
300 W252.51.30431.25
500 W41.66674.16672.17392.0833
600 W5052.60872.5
750 W62.56.253.26093.125
1,000 W83.33338.33334.34784.1667
1,200 W100105.21745
1,440 W120126.26096
1,500 W12512.56.52176.25
1,800 W150157.82617.5
1,920 W160168.34788
2,000 W166.666716.66678.69578.3333
2,400 W2002010.434810
3,000 W2502513.043512.5
3,600 W3003015.652215
4,000 W333.333333.333317.391316.6667
4,800 W4004020.869620
5,000 W416.666741.666721.739120.8333
7,200 W6006031.304330
10,000 W833.333383.333343.478341.6667

Sizing a circuit or a wire? Use the nameplate current of the appliance and follow your electrical code or an electrician. Continuous loads should stay well under a breaker's rating. This converter shows the current at the voltage you give; it isn't a code calculation.

Going the other way? Use the Amps to watts converter. Related: Amps to watts, Watts to horsepower.

Sources

How we checked this

Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:

  • 1,500 W at 120 V = 12.5 A ✓
  • 100 W at 12 V DC = 8.3333 A ✓
  • Three phase, 480 V, power factor 0.85: 10,000 W = 14.1507 A ✓
  • Edge case: 0 V is rejected ✓

Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.

Add this calculator to your website (free)

Paste this code into any web page. The calculator works on your page, resizes itself, has no ads and no tracking cookies, and nothing your visitors type is sent anywhere. More about embedding.

Questions people ask

How many amps is 1,500 watts?

12.5 A at 120 V, and 6.25 A at 240 V (power factor 1): 1,500 ÷ 120 = 12.5.

How many amps is 1,000 watts at 120 V?

1,000 ÷ 120 = 8.3333 A.

How many amps is 100 watts at 12 V?

100 ÷ 12 = 8.3333 A DC.

Why do I need the voltage?

Watts = volts × amps. The same power at half the voltage needs twice the current.

Related calculators