Calcist

Style

Buttons

Spacing

How much to show

Decimal places

Text size

Wallpaper calculator

Enter the room's walls, the openings and the roll's size and pattern repeat to get the strips you need, how many strips each roll gives, and the rolls to buy.

Private: calculated on your device. Nothing you type is sent anywhere.

Next: Painting the other walls? The paint calculator gives the gallons.

How the rolls are counted

Wallpaper goes up in full-height strips, and the leftover piece at the end of each roll is usually too short to use. So the honest way to count is in strips, not square feet.

Net wall area = perimeter × height − doors − windows
Strips needed = net wall area ÷ height ÷ (roll width ÷ 12), rounded up
Strip length = height × 12 + 4 in for trimming, rounded up to a whole number of pattern repeats
Strips per roll = roll length × 12 ÷ strip length, rounded down
Rolls = strips needed ÷ strips per roll, rounded up

Rounding each strip up to a whole repeat makes every strip start at the same point in the pattern, so it lines up with its neighbor. That is where most pattern waste comes from.

Worked example

A 12 × 14 ft room has a perimeter of 52 ft and 8 ft walls. Wall area = 52 × 8 = 416 sq ft. Take off one door (21 sq ft) and two windows (2 × 15 = 30 sq ft): 365 sq ft. That's 365 ÷ 8 = 45.6 ft of wall, or 547.5 in. With 20.5 in wide paper: 547.5 ÷ 20.5 = 26.7, so 27 strips.

Each strip needs 96 + 4 = 100 in. With a 21 in repeat, round up to 5 repeats = 105 in. A 33 ft roll is 396 in long: 396 ÷ 105 = 3.77, so 3 strips per roll. 27 ÷ 3 = 9 rolls.

Roll sizes

RollWidth × lengthArea
Single roll20.5 in × 16.5 ft28 sq ft
Double roll20.5 in × 33 ft56 sq ft
Single roll27 in × 13.5 ft30 sq ft
Double roll27 in × 27 ft60 sq ft
Single roll36 in × 12 ft36 sq ft

In the US, wallpaper is often priced per single roll but sold only in double rolls (one long bolt). Enter the length of the bolt you'll actually get. European rolls are usually about 21 in (0.53 m) × 33 ft (10 m); check the label.

Getting a realistic number

  • Buy one extra roll for mistakes and future repairs, and buy all rolls from the same batch (dye lot) so the color matches.
  • Drop match patterns can waste more than a straight match; the label lists the repeat and match type.
  • Sloped ceilings, stairwells and wide window walls are better measured strip by strip.
  • Ceilings are counted separately: treat the ceiling as a wall whose height is the room's width.

Sources

How we checked this

Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:

  • 52 ft × 8 ft room, 1 door, 2 windows, 20.5 in × 33 ft rolls, 21 in repeat: 9 rolls ✓
  • Same room: 27 strips ✓
  • 27 in × 27 ft rolls, no repeat: 21 strips at 3 per roll = 7 rolls ✓
  • Edge: an 8 ft roll is shorter than a 100 in strip ✓

Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.

Add this calculator to your website (free)

Paste this code into any web page. The calculator works on your page, resizes itself, has no ads and no tracking cookies, and nothing your visitors type is sent anywhere. More about embedding.

Questions people ask

How many rolls of wallpaper for a 12 × 12 room?

With 8 ft walls, one door and one window, 20.5 in × 33 ft double rolls and a 21 in repeat: 48 × 8 − 36 = 348 sq ft, 26 strips at 3 per roll, so 9 double rolls.

How many square feet does a roll of wallpaper cover?

An American single roll is about 28 to 36 sq ft and a double roll 56 to 72 sq ft, but after trimming and pattern matching you usually get about 80% of that.

What is a pattern repeat?

The vertical distance before the pattern starts again. A bigger repeat means more paper is cut off each strip to line the pattern up.

Should I subtract doors and windows?

Yes for doors and large windows. For small windows many hangers don't, because the pieces around them come from full strips anyway.

How many strips are in a double roll?

For 8 ft walls, a 33 ft (396 in) double roll gives 3 strips: each needs at least 100 in with trimming, and 396 ÷ 100 = 3.96 rounds down to 3. A large repeat can cut that to 2.

Related calculators