How the dose is worked out
One ppm is one pound of chlorine per million pounds of water. Water weighs about 8.34 lb per gallon (USGS), so raising a pool by 1 ppm takes gallons × 8.34 ÷ 1,000,000 lb of available chlorine. Divide by the fraction of available chlorine in the product to get the amount of product.
Ounces (weight) = pounds × 16
Liquid chlorine: gallons of product = pool gallons × ppm rise ÷ (trade % × 10,000)
Fluid ounces = gallons of product × 128
Liquid chlorine (sodium hypochlorite) is labeled by trade percent, which is grams of available chlorine per 100 mL. That makes the arithmetic simple: HASA, a liquid chlorine maker, notes that 1 gallon of X% trade liquid raises 10,000 gallons by X ppm. Dry products are labeled by weight: cal-hypo is usually 65% to 73% available chlorine, dichlor 56% (as printed on EPA-registered dichlor labels) and trichlor about 90%. Use the figure on your own label if it differs.
Worked example
A 15,000 gallon pool reads 0 ppm and you want 3 ppm, using 12.5% liquid chlorine: 15,000 × 3 ÷ (12.5 × 10,000) = 0.36 gallons, × 128 = 46.1 fl oz.
The same rise with 65% cal-hypo: 15,000 × 3 × 8.34 ÷ 1,000,000 ÷ 0.65 = 0.577 lb, × 16 = 9.2 oz by weight.
| Product | Raise 10,000 gal by 1 ppm |
|---|---|
| Liquid chlorine 12.5% | 10.2 fl oz |
| Liquid chlorine 10% | 12.8 fl oz |
| Cal-hypo 65% | 2.1 oz |
| Cal-hypo 73% | 1.8 oz |
| Dichlor 56% | 2.4 oz |
| Trichlor 90% | 1.5 oz |
What level to aim for
CDC recommends keeping free chlorine at at least 1 ppm in home pools (at least 2 ppm if you use cyanuric acid or stabilized chlorine) and at least 3 ppm in hot tubs, with pH between 7.0 and 7.8. Shocking to clear algae uses much higher levels, so follow the product label.
Things to watch
- Stabilized chlorine adds cyanuric acid. Dichlor and trichlor raise the stabilizer (CYA) level every time you use them, and a high CYA makes chlorine work more slowly. Cal-hypo adds calcium, and liquid chlorine adds a little salt and raises pH.
- Liquid chlorine weakens with age and heat. A jug that has sat in the sun for weeks may be well under its label strength, so retest after dosing.
- Never mix chlorine products together, and add chlorine to water, not water to chlorine. Read and follow the label; it is the law for EPA-registered pool chemicals.