How grout is calculated
Grout fills the joints, so the amount depends on how much joint there is per square foot (smaller tiles mean more joints), how wide the joints are, and how deep (the tile's thickness).
Joint volume (cu in) = joint share × area (sq ft) × 144 × tile thickness
Pounds = joint volume ÷ 1,728 × density (lb per cu ft); 1 kg/L = 62.43 lb per cu ft
The first line is exact for a grid of rectangular tiles: each tile plus its share of the joints makes a repeating block (L + joint) × (W + joint).
Worked example
12 × 12 in tiles, ⅜ in thick, with ⅛ in joints, over 100 sq ft. Joint share = (0.125 × 24 + 0.0156) ÷ (12.125 × 12.125) = 3.0156 ÷ 147.02 = 2.05%. Joint volume = 0.0205 × 100 × 144 × 0.375 = 110.8 cu in. At 1.6 kg/L (99.9 lb per cu ft): 110.8 ÷ 1,728 × 99.9 = 6.4 lb, or 7.0 lb with 10% extra.
About the density
The density is the weight of the grout in place, which varies by product. Sika lists about 1.6 kg/L for one cement tile grout, and that's the default here. Sanded grouts are often heavier and epoxy grouts differ again, so if your bag gives coverage or density, use it. Manufacturers' coverage charts vary and some assume slightly different joint depths.
Getting a realistic number
- Add 10% for waste; UZIN's grout calculator suggests the same buffer because joint width and depth vary on site.
- Small tiles and mosaics use much more grout per square foot. At the same joint width and depth, 2 × 2 in mosaics take more than 5 times as much as 12 × 12 in tile.
- Joint depth is usually close to the tile's thickness, minus any thinset that squeezed up.
- Mix only what you can use in the working time on the bag.