Enter the three numbers on the bag, your lawn size and how much nitrogen you want to apply to get the pounds of product and the number of bags.
How fertilizer is calculated
Lawn fertilizer rates are given in pounds of nitrogen (N) per 1,000 sq ft. The first number on the bag is the percent nitrogen by weight, so divide the rate you want by that percent.
Product per 1,000 sq ft = lb N wanted ÷ (N% ÷ 100)
Total product = product per 1,000 × area ÷ 1,000
Bags = total ÷ bag weight, rounded up
Worked example
Iowa State University Extension's example: 32-0-4 fertilizer at 1 lb of N per 1,000 sq ft. 1 ÷ 0.32 = 3.125 lb of product per 1,000 sq ft. On a 5,625 sq ft lawn: 3.125 × 5,625 ÷ 1,000 = 17.58 lb.
Penn State Extension's: 26-5-10 at 1 lb N is 3.85 lb per 1,000 sq ft. A 50 lb bag covers 50 ÷ 3.846 × 1,000 = 13,000 sq ft, so a 30,000 sq ft lawn needs 115.4 lb, or 2.3 bags; you'd buy 3.
How much nitrogen to apply
A single feeding is usually 0.5 to 1 lb of nitrogen per 1,000 sq ft. Use the lower end for quick-release fertilizer and in hot weather, and follow your state extension service's yearly total for your grass type. A soil test tells you whether you need phosphorus (P) or potassium (K) at all; many lawns don't need phosphorus, and some states restrict it.
| Fertilizer | lb per 1,000 sq ft for 0.5 lb N | for 1 lb N |
|---|
| 46-0-0 (urea) | 1.09 | 2.17 |
| 32-0-4 | 1.56 | 3.13 |
| 26-5-10 | 1.92 | 3.85 |
| 16-4-8 | 3.13 | 6.25 |
| 10-10-10 | 5 | 10 |
Limitations
- Spreader settings vary. Set your spreader from the bag's chart, then check it by weighing what you put in and what's left.
- Measure only the lawn, not the house, driveway or beds.
- Keep it off hard surfaces. Sweep fertilizer off driveways and sidewalks so it doesn't wash into storm drains.
- Follow the label and local rules, which may limit rates, timing or phosphorus.
Sources
How we checked this
Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:
- 32-0-4 at 1 lb N per 1,000 sq ft: 3.125 lb of product per 1,000 sq ft (Iowa State) ✓
- Same on 5,625 sq ft: 17.58 lb ✓
- 26-5-10 at 1 lb N on 30,000 sq ft: 115.4 lb, 3 bags of 50 lb (Penn State: 2.3 bags) ✓
- Edge: 0% nitrogen can't supply nitrogen ✓
Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.
Questions people ask
How much fertilizer do I need for 1,000 square feet?
Divide the nitrogen rate by the first number on the bag as a decimal. For 1 lb of N with 32-0-4, 1 ÷ 0.32 = 3.1 lb of product per 1,000 sq ft.
How much 10-10-10 do I need per 1,000 square feet?
For 1 lb of nitrogen, 10 lb of 10-10-10 (1 ÷ 0.10). For 0.5 lb of N, 5 lb.
How many square feet does a 50 lb bag of fertilizer cover?
Divide 50 by the pounds per 1,000 sq ft and multiply by 1,000. For 26-5-10 at 1 lb N (3.85 lb per 1,000), about 13,000 sq ft.
What do the three numbers on fertilizer mean?
The percent by weight of nitrogen (N), phosphate (P₂O₅) and potash (K₂O). A 50 lb bag of 20-5-10 holds 10 lb of N, 2.5 lb of phosphate and 5 lb of potash.
How much nitrogen should I put on my lawn?
Typically 0.5 to 1 lb of N per 1,000 sq ft per feeding. Your state extension service publishes yearly totals by grass type.